A modular construction method inspired by origami could make it easier to fabricate lightweight, rigid structures at architectural scales, according to an October 27 report by Adam Zewe for MIT News. The approach turns flat sheets into individually folded units that connect into larger structural shells. The researchers say the method may use less material than some alternatives, but its performance in buildings remains to be tested.

The work is described in a paper titled “Resch Tessellations as Stiff, Folded Modular Shells,” which the report says appears in the International Journal of Solids and Structures. Lead author Alfonso Parra Rubio is a graduate student at MIT’s Center for Bits and Atoms. The other named paper authors are Riccardo Foschi of the University of Bologna, Rupert Maleczek of the University of Innsbruck, Tomohiro Tachi of the University of Tokyo, and senior author Neil Gershenfeld, an MIT professor and director of the Center for Bits and Atoms.

The researchers drew on repeating polygonal patterns developed by artist and scientist Ron Resch in the 1960s. Rather than making a structure from a single folded sheet, they make separate building blocks, fold them, and connect them. Parra Rubio developed a way to combine two tripod-shaped units from a Resch tessellation into a rigid block with zero degrees of freedom: once locked, it cannot move freely. Linked into a network of interwoven beams, the blocks form a three-dimensional structure.

To help designers create structures that meet specified constraints, Parra Rubio and MIT graduate student Erik Strand developed an automated solver. It designs manufacturable unit cells, each checked for foldability before the cells are assembled into an overall design. The files can then guide a CNC milling machine to cut the blocks from flat sheets, including aluminum. Builders fold the pieces and connect them with hand tools such as screwdrivers. The report says the connections help units settle into the correct shape, and that the method does not require large-scale welding equipment.

Computer simulations indicated that structures made this way could be about 3.5 times stiffer than those produced with some other structural-origami techniques. The report also says the method can use about two-thirds as much material as some alternatives. These are comparisons reported for the technique, not a guarantee that every design will deliver the same gains; the report does not specify the comparison designs or simulation assumptions. Less material could make construction more sustainable, but a reduction in material alone does not establish the full environmental impact of a building.

The team also demonstrated the approach beyond small prototypes. Researchers assembled a 23-foot sculpture from folded aluminum pieces and suspended it in the Boston Public Library’s atrium. According to Parra Rubio, a team without professional construction experience built it in a matter of days. That installation shows the modules can be fabricated and assembled at a much larger scale than small prototypes. It is a sculpture, however, rather than a test of a completed building or shelter under operational conditions.

The researchers identify disaster-relief shelters as one possible use: flat panels might be shipped efficiently and assembled quickly at a site. They also point to lightweight components for aircraft or modular robots, as well as architectural elements such as sound-dampening panels and facades. Those are proposed applications. The team says it still wants to test the method in larger architectural structures, explore more complex unit geometries, and develop a user-friendly design interface. How the structures perform under real building loads and over time remains an open engineering question.